Basra, Iraq · Established 2007
Engineering.
Construction.
Field delivery.
TAAM main camp
01 About TAAM
Local presence. Multidisciplinary capability.
Based in Basra.
Powered by Engineers
Established in 2007, TAAM Engineering Company provides engineering, procurement, construction and industrial services for oil and gas facilities and other industrial projects.
TAAM provides comprehensive support for both greenfield and brownfield projects, including pipeline installation, wellhead hook-ups, facility modifications and manifold fabrication. Our in-house workshop capabilities allow us to maximize off-site fabrication, minimize on-site activities, reduce execution time and maintain the highest safety standards. Our multidisciplinary site teams deliver civil, mechanical, electrical and instrumentation works, supported by a dedicated commissioning department to ensure safe, efficient and seamless project completion.
Explore our facilities
Multidisciplinary delivery
Coordinated engineering, procurement and site teams for defined project packages.
Capability
Workshop preparation and prefabrication connected to field installation.
Operating-field experience
Brownfield work coordinated with site interfaces and permit-to-work controls.
02 Capabilities
From preparation to handover
Integrated services.
Defined project scopes.
TAAM combines EPC delivery and specialist construction services. Our responsibilities and interfaces are defined for each contract.
Pipeline construction
Flowlines, pipelines and water injection networks, including associated civil works, welding, installation and testing.
Scope details: Pipeline construction
Typical activities include pipeline engineering, route preparation, trenching, pipe handling, welding, joint coating, pipe lowering and tie-ins. Our capabilities extend to advanced non-destructive testing (NDT), inspection and pressure testing in accordance with project specifications and applicable standards. TAAM also provides complete cathodic protection (CP) systems, covering engineering, design, material supply, installation, testing and commissioning.
Specialized GRE/GRP jointing and installation services support composite pipeline projects. Cleaning, gauging, testing and final handover activities are performed in accordance with the contractual scope, ensuring quality, safety and reliable project delivery.
Well hook-ups & manifolds
Well hook-up installation, piping integration, manifold fabrication and associated skid works.
Scope details: Well hook-ups & manifolds
Engineering and fabrication support for oil gathering and water injection systems, including piping arrangements, manifold skids, supports and installation interfaces. Site teams perform the agreed installation, inspection and testing activities before handover.
Brownfield modifications
Multidisciplinary modifications and tie-ins at existing process and oilfield facilities.
Scope details: Brownfield modifications
Piping modifications, equipment interfaces, tie-ins and multidisciplinary installation at operating facilities. Activities are coordinated through workfront planning, isolation interfaces, permit-to-work requirements and simultaneous operations (SIMOPS) controls.
Mechanical installation
Installation of process packages, pumps, skids, tanks, vessels and associated piping.
Scope details: Mechanical installation
Installation of static and rotating equipment, process skids, pumps, tanks and associated supports. Work may include mechanical connections, alignment, tank repair and modification activities, testing and completion documentation, according to the approved scope.
Civil & structural works
Industrial foundations, concrete supports, drainage and structural steel installation.
Scope details: Civil & structural works
Equipment foundations, concrete sleepers and supports, drainage, access works, structural steel and pipe support installation. Civil and structural interfaces are coordinated with the equipment and piping requirements of the approved drawings.
Electrical & instrumentation
Cable installation, termination, earthing, field instrumentation and calibration support.
Scope details: Electrical & instrumentation
Power and instrument cable installation and termination, earthing, cathodic protection, field instrumentation, calibration and loop-check support. Telecom installation and control-system interfaces are coordinated with the project and relevant specialist parties.
Pre-commissioning & commissioning assistance
System completion, test records, punch-list close-out and phased handover support.
Scope details: Pre-commissioning & commissioning assistance
Test documentation, punch-list close-out, system completion, pre-commissioning activities and commissioning assistance. Teams support phased handover and start-up readiness under the approved project procedures and operating authorization arrangements.
Fabrication & coating
Pipe spool, manifold and structural steel fabrication, with surface preparation and coating services.
Scope details: Fabrication & coating
Pipe spool, manifold and structural steel fabrication, with workshop preparation, welding, inspection, surface preparation and protective coating. Assemblies are prepared to approved drawings, specifications and project inspection requirements.
Inside the work
Preparation you can see.
Execution you can follow.
Explore workshop fabrication, pipeline installation, lifting and testing through TAAM’s project photography. See how preparation connects with field execution.
From Engineering to Testing
Workshop facilities support material preparation, fabrication and inspection before assemblies are released to the site.
Pipeline handling in the field
Lifting equipment and field teams coordinate pipe movement and lowering along the prepared corridor.
Hot tapping
Hot tapping supports connections to existing gas, water, drainage and instrument air systems, with engineering review, operations coordination and inspection.
Instrument calibration
Instrument calibration and verification support system completion and provide documented test results.
Lifting and installation
Lifting supports the placement of piping and equipment at the workfront. Planning connects the lifting arrangement with access, operating interfaces and installation requirements.
Repair work for existing tanks
Internal tank activities bring access, surface preparation, installation and inspection requirements into a coordinated work package.
Our Clients
03 Project experience
Selected delivery experience
Work at Iraq’s
operating oilfields.
Selected examples show TAAM’s project scope and field experience.
TotalEnergies · Ratawi, Iraq
CPF-1 Modifications
& Upgrade
Multidisciplinary brownfield delivery for the modification and upgrade of existing CPF-1 facilities in Ratawi Oil Field.
- Scope
- Defined engineering, procurement, civil, structural, piping, mechanical, electrical, instrumentation and telecom works.
- Completion support
- Testing, pre-commissioning and commissioning assistance.
- Execution environment
- Operating-facility interfaces, SIMOPS coordination and permit-to-work requirements.
Eni / ZFOD · Zubair, Iraq
Piping & Mechanical
Installation Works
Field piping and mechanical construction across Zubair Oil Field facilities, with work packages defined through the applicable project and call-off requirements.
- Scope
- Engineering, procurement and construction across existing DGs and IPFs.
- Execution environment
- Work within Zubair Oil Field, with site resources and workshop preparation coordinated around operating interfaces.
- Completion support
- Testing, pre-commissioning, commissioning and handover support.
Explore project references
More of TAAM’s project experience.
Open a company group or search by client, project title or reference number. Entries include frameworks, construction packages and additional work; they are not a count of separately completed projects.
Search the reference archive below. Clear the search field to restore all entries.
No matching references. Try another project or client name.
TotalEnergies5 reference entries
Reference CTR110364
Additional Work for TK02 Repair
Reference CTR107701
AGUP Phase 1 – CPF1 Modifications & Upgrade
Reference CTR105998
TK02 Repair & Floating Arm Installation (RFM055 & RFM042)
Reference CTR105999
AGUP Phase 1 – Cold Vent Lines (RFM023)
Reference CTR104455
Framework Agreement for Construction Services – AGUP Phase 1
Eni20 reference entries
Reference 5010004971
Fabrication and Supply of Oil and Water Injection Manifolds
Reference 5010003960
Water Lines Network Installation
Reference 5010003898
Piping & Mechanical Installation Works
Reference 5000025327
EPC Oil Gathering Network Installation
Reference 5000024707
OG WI - Water Line Network
Reference 5000024371
Water injection Well Hook Up EPC
Reference 5000024172
Oil Gathering Well Hook-Up
Reference 5000023887
Fabrication of Oil Manifolds
Reference 5000022961
Piping & Mechanical Installation Works
Reference 5000021396
OG Network EPC Installation
Reference 5000021858
Piping & Mechanical Installation Works
Reference 5000020499
Water Lines Network Installation
Reference 5000019431
Oil Well Area Hook-Up
Reference 5000016661
Provision of Piping & Mechanical Installation Works
Reference 5000015661
Flowline Pipeline Installation, Wellhead Connections and existing DGS Revamping and Modifications
Reference 5000013104
EPC for Water Injection Well Hook-Up
Reference 46000035722
Multiphase Pipeline between Zubair and Rafidya DGS Facilities
Reference 5000013113
EPC for Oil Gathering Well Hook-Up
Reference 4600011607
EPC for Four Manifolds Installation
Reference 4600012479
EPC for Twelve Manifolds Installation
BGC3 reference entries
Reference CW42325
Integrated Services Construction Framework for Assets
Reference CW41988-B
Pipeline Projects Delivery
Reference CW40940
Brownfield Modification MOC Services
bp / Rumaila3 reference entries
Reference 103653
Flowline Installation Services (ST2)
Reference 103114
Pipeline Installation Services
Reference CN102444
Pipeline and Pipework Installation Services
CPP1 reference entry
Reference 01-RML08-CS-01-022
Pipeline Installation Services
SICIM3 reference entries
Reference SUB-112-22-IQE-MA
Pipeline Installation Services
Reference IQ022-SUB-001-SI-TAAM
Pipeline Installation Services
Reference IQ033-SUB-001-SI-TAAM
Pipeline Installation Services
PEG1 reference entry
Reference PE19527-008
CRU Hammar IPF Condensate Recovery Unit
MOD — Construction, Operation & Maintenance1 reference entry
Reference 4600039760
GRP Pipeline Construction Works
04 Project delivery
From scope definition to completion
A coordinated path
through the project.
Engineering, procurement and field activities are connected through project planning, quality controls and interface management.
Engineering
Scope review, construction engineering, drawings and technical interfaces establish the basis for the work package.
Deliverables · interfaces · readinessProcurement
Technical evaluation, material sourcing, vendor coordination and logistics support the approved project requirements.
Materials · vendors · logisticsConstruction
Site work is coordinated around permits, access requirements, lifting activities, discipline interfaces and inspection points.
Workfronts · permits · installationCommissioning
Testing, pre-commissioning and commissioning prepare installed systems for safe start-up and handover, supported by completion records.
Testing · system checks · start-upHandover
Testing, completion records, punch-list close-out and commissioning assistance support the agreed handover process.
Testing · records · completionSpecialist systems & field services
The right expertise.
At the critical interface.
From composite water-injection lines to brownfield connections and instrument verification, TAAM brings package-specific experience to the interfaces that shape installation, testing and handover.
GRE, GRP & HDPE pipelines
- Material handling and joint preparation
- Lamination and adhesive-bonded connections
- Alignment, inspection and installation records
Package planning & delivery
Relevant experience includes GRP water-injection trunkline work in Zubair Oil Field.
Tank repairs using composite materials
- Tank repair and modification work
- Floating suction arms, nozzles and internal components
- Surface preparation and coating interfaces
Package planning & delivery
Access, lifting and confined-space controls are planned around the approved repair scope.
Calibration & loop checks
- Instrument identification and verification
- Calibration records and field checks
- Loop-check and completion support
Package planning & delivery
Testing follows the approved procedures and the project’s control-system interfaces.
Manifolds: design to installation
- Process diagrams, line lists and piping layouts
- Stress analysis and civil support drawings within scope
- Weld maps, inspection records and handover dossiers
Package planning & delivery
Engineering and fabrication records provide the link between the defined package and the installed system.
Bring the system, operating conditions and scope. We’ll discuss the delivery requirements.
Discuss a specialist package
TAAM · FACILITIES & RESOURCESBASRA, IRAQ
Zubair Main Camp
05 SITES · BASRA AREA MAPBasra Governorate
Drag to move. Search a road or TAAM site.
1.0×
50 km
Zubair
Ratawi
Rumaila
Zubair Main Camp30.449472° N · 47.613436° E
● TAAM · ─ ROADS
1 / 8
SCROLL TO EXPLORE
05 Facility photo archive
Explore our facilities in detail.
Browse actual facility photographs and the existing workshop, camp and site information.
Zubair · TAAM Main FacilityView facility details +
01 / Zubair Oil Field
TAAM Main Facility
The main facility brings workshop production and management support together inside Zubair Oil Field. Piping and structural fabrication, coating preparation, material storage and inspection support are connected to construction teams through TAAM’s site and management offices.
Zubair Main Camp
Fabrication & finishing
- Piping fabrication, fit-up and welding
- Structural steel cutting, machining and assembly
- Automated and robotic welding equipment
- Sandblasting, surface preparation and painting
Project & material support
- Construction management and quality-control offices
- Procurement and contract follow-up
- Warehouses and material laydown areas
- Dedicated non-destructive testing support
People & preparedness
- TAAM Academy training facilities
- Accommodation and dining services
- Clinic and medical support
- HSE office and firefighting station
Ratawi · TCF & Accommodation FacilityView facility details +
02 / Ratawi Oil Field
Two facilities.
One project-support network.
At Ratawi, also known as Artawi, TAAM’s Temporary Construction Facility and Accommodation Facility support the CPF-1 Modification and Upgrade Project. Each has a distinct role: preparing and coordinating the work, and supporting the people who deliver it.
TAAM TCF
Temporary Construction Facility
Located with direct access to CPF-1, the TCF connects project offices, materials and technical preparation with field execution.
- TAAM and client project offices
- Material storage areas and construction logistics yard
- Electrical and instrumentation workshop
- Instrumentation calibration container
- On-site clinic and dining facilities
TAAM Accommodation Facility
Contractor Accommodation Camp
A dedicated camp provides accommodation and life-support services for project personnel, with staff areas arranged to meet the project’s requirements.
- Accommodation and housekeeping services
- Dining facilities, café and meeting rooms
- Outdoor rest areas and recreation rooms
- Football and volleyball play areas
- Associated open yard and organized material storage
Rumaila · TAAM Rumaila FacilityView facility details +
03 / Rumaila Oil Field
TAAM Rumaila Facility
The Rumaila facility provides a local base for project management and field support. Office space brings construction management, quality control and administrative coordination together close to the work.
Local project coordination
Construction planning, quality-control coordination and administrative support connect the site team with TAAM’s wider delivery organization.
Home-office interfaces
Engineering, procurement and subcontracting support are coordinated according to the contract and the needs of the work package.
06 QHSE
Quality. Health. Safety. Environment.
Controlled work.
Documented quality.
TAAM integrates quality, safety and environmental controls into project execution, supported by inspection, NDT and traceable completion records.
Quality assurance & control
From requirements
to release.
Approved drawings, specifications, inspection records and test records support traceable project delivery.
- Material identification and traceability
- Fabrication and installation inspection
- NDT coordination and records
- Pressure testing and instrument verification
- Completion and handover records
Health & safety
Plan the activity.
Control the exposure.
Risk assessments, permits, training and emergency planning guide safe site execution.
- Risk assessments, permits and SIMOPS
- Controls for lifting operations, work at height and confined-space entry
- Excavation and safe-isolation controls
- PPE, heat and hazardous-substance awareness
- First aid, emergency response and fire prevention
Environmental care
Environmental controls cover material handling, camp operations, wastewater treatment and water-quality monitoring.
Competence & communication
TAAM Academy, site briefings and lessons learned support workforce competence and safe execution.
Local QHSE resources
Dedicated NDT, HSE, clinic and calibration facilities support the Zubair and Ratawi project teams.
Awareness at the workfront
Safety engagement
connected to daily work.
Site briefings and safety-awareness activities reinforce safe daily work.
TAAM certification documents
Four systems.
View the certificates.
Select a standard to open TAAM’s original certificate PDF. Each document shows the certified entity, scope, certificate number and printed validity dates.
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 50001:2018
Workforce development
Training connected
to site requirements.
Internal training and lessons learned support workforce development. Training activities address the technical and HSE needs of project teams.
Project-specific induction and task briefings connect this training to the requirements of the workfront.
Working with TAAM
Useful information
for your enquiry.
Share the project requirements so our team can identify relevant experience, resources and technical information.
What information should an enquiry include?
Provide the scope of work, site location, relevant drawings or specifications, required delivery schedule and your contact details. For tender enquiries, include the submission deadline and clarification requirements.
Can TAAM support a defined EPC package?
Yes. Share the scope, specifications and proposed execution schedule. Our team can review the package, identify interfaces and clarify the proposed delivery responsibilities.
Can TAAM work at an operating facility?
Share the facility constraints, access arrangements and operating interfaces with your enquiry. Planning for operating-facility work addresses permits, isolation interfaces and simultaneous operations (SIMOPS).
What project-reference information can be requested?
Contact our team with the relevant discipline or project type. Applicable capability, project-reference and management-system information can be provided for evaluation, subject to the information available for release.
07 Contact TAAM
Your project requirements
Discuss your next
project with TAAM.
Send your project scope, location and required schedule. Our team will review the enquiry and provide applicable capability and project-reference information.
Based in Basra, Iraq.